Welcome, Guest
Username: Password: Remember me

TOPIC: firmware update

firmware update 3 years 3 months ago #453

  • tracer
  • tracer's Avatar
  • Offline
  • New Member
  • Posts: 6
  • Karma: 0
Adam I am having the same problem going on that pjnowak 1213 was having. I don't have my board installed yet. I have it on the table and entered my set up for brewing. Then set the valve profiles and seen that they were turning on out put pins on the board. Then I went to the get hub and down loaded the brewtroller firmware that you had pinowak 1213 download. It uploaded to my board ok but now my valve profiles don't work.
Have you had any luck getting things working yet? Tom
This email address is being protected from spambots. You need JavaScript enabled to view it.
The administrator has disabled public write access.

firmware update 3 years 3 months ago #454

  • adam
  • adam's Avatar
  • Offline
  • Administrator
  • Posts: 209
  • Thank you received: 19
  • Karma: 5
You have a phoenix correct?

If so, the IDE is not going to work unfortunately. We will be updating the Update Utility with the Phoenix hardware profile here VERY soon. For now, I can walk you through uploading a hex file that should fix your issues. I'll be writing up a how-to this weekend for Phoenix users who are having this issue.

Send me an email for now and I can give you the details.
____________________________________
Adam Shake
Owner - BrewTroller
The administrator has disabled public write access.

firmware update 3 years 3 months ago #455

  • tracer
  • tracer's Avatar
  • Offline
  • New Member
  • Posts: 6
  • Karma: 0
Yes I have a Phoenix. I also have a DX1 and pro 4. The DX 1 has lost out put to the boil kettle and that is why I bought the Phoenix. I have used the 2.7 version of the firmware on the DX1 since the day it was made available to download. I had a problem with the boil staying on when I first used it but matt fixed that in a couple of days and I haven't had any problems since. I can go back to 2.6 if I have to. (there's not much difference for what I do ) I have several things I need to change in config h files to make my system work and don't think a do every thing utility will do me a lot of good. So I'll have to wait until I can upload 2.6. Thanks Tom
The administrator has disabled public write access.

firmware update 3 years 3 months ago #456

  • adam
  • adam's Avatar
  • Offline
  • Administrator
  • Posts: 209
  • Thank you received: 19
  • Karma: 5
Tom,

What kind of changes to the config.h files are you anticipating? Some of the common features are included in the update utility, and our plan is stop supporting the IDE as a method and get all of the options you need moved into the update utility. So knowing what you need will help us to get there. I'll be working this weekend on instructions on how you can get stuff uploaded!

-Adam
____________________________________
Adam Shake
Owner - BrewTroller
The administrator has disabled public write access.

firmware update 3 years 3 months ago #457

  • adam
  • adam's Avatar
  • Offline
  • Administrator
  • Posts: 209
  • Thank you received: 19
  • Karma: 5
Tom,

Here are those instructions:

brewtroller.com/pages/1284-firmware-upload-via-ide
____________________________________
Adam Shake
Owner - BrewTroller
The administrator has disabled public write access.

firmware update 3 years 3 months ago #459

  • tracer
  • tracer's Avatar
  • Offline
  • New Member
  • Posts: 6
  • Karma: 0
Adam Thanks for the instructions hope I can figure them out. I'm not very good at chasing files around but will give it a try when I have some free time. If it wasn't for Jason VonNida I would never have got my pro 4 board up and working.

Thanks Tom
The administrator has disabled public write access.
Time to create page: 0.085 seconds
Follow via Facebook Follow via Twitter

Login