Welcome, Guest
Username: Password: Remember me

TOPIC: OT DX1 Heartbeat is not beating.

OT DX1 Heartbeat is not beating. 3 years 5 months ago #495

  • Roi.Diver
  • Roi.Diver's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Karma: 0
Has anyone had any issues with their DX1 heartbeat LED not flashing? For a little history: Years ago , I originally uploaded v2.5 build 1026 with an older Mac (Lion, I think), addressed the displays, programmed the RGBI/O boards, etc. Everything responded as expected (though not actually controlling any outputs/devices).
Recently I tried to update my firmware to v2.6 build 6, with a newer Mac and the encoder never responded again. I also noticed that the heartbeat LED would stay solid on, and turn off if I pushed the BT Reset button.
After trying several different firmware builds, using the Mac with El Capitan, having one compiling issue after another, I gave up and went the Windows route. I was able to compile 2.6 build 6, upload it and had no errors (amazing). However, still no joy with the heartbeat or encoder.
The adjustable DC power supply has always been rock solid at 12 VDC, for what it's worth. During boot up, the displays will flash their addresses and then go blank. RGB boards cycle the RGB LEDs through the colors when the selector switches are in the off position (default setting if I remember correctly).
Does anybody have any suggestions? Thanks in advance.
Roi.Diver
Last Edit: 3 years 5 months ago by Roi.Diver.
The administrator has disabled public write access.

OT DX1 Heartbeat is not beating. 3 years 5 months ago #496

  • adam
  • adam's Avatar
  • Offline
  • Administrator
  • Posts: 210
  • Thank you received: 19
  • Karma: 5
Does your LCD get to the BrewToller Logo Screen?
____________________________________
Adam Shake
Owner - BrewTroller
The administrator has disabled public write access.

OT DX1 Heartbeat is not beating. 3 years 5 months ago #497

  • Roi.Diver
  • Roi.Diver's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Karma: 0
Yes, it does. Shows: BrewTroller 2.6 Build 0006
Thanks for the reply, Adam.
The administrator has disabled public write access.

OT DX1 Heartbeat is not beating. 3 years 5 months ago #498

  • adam
  • adam's Avatar
  • Offline
  • Administrator
  • Posts: 210
  • Thank you received: 19
  • Karma: 5
But your PID displays and the encoder are non functional? Did you make any changes to the firmware?
____________________________________
Adam Shake
Owner - BrewTroller
The administrator has disabled public write access.

OT DX1 Heartbeat is not beating. 3 years 5 months ago #499

  • Roi.Diver
  • Roi.Diver's Avatar
  • Offline
  • New Member
  • Posts: 12
  • Karma: 0
PID's flash their test display, then their proper addresses, and go blank. The only changes I made to the firmware was in the HWProfile.h. Switched from RIMS Direct Fire to HERMS. Cut and paste.
The administrator has disabled public write access.

OT DX1 Heartbeat is not beating. 3 years 5 months ago #500

  • adam
  • adam's Avatar
  • Offline
  • Administrator
  • Posts: 210
  • Thank you received: 19
  • Karma: 5
Do you see any errors when uploading the firmware? I assume you are using the 0022 IDE?
____________________________________
Adam Shake
Owner - BrewTroller
The administrator has disabled public write access.
Time to create page: 0.214 seconds
Follow via Facebook Follow via Twitter

Login