Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Enable Modbus Relay Board

Enable Modbus Relay Board 3 years 11 months ago #482

  • chrisfrob
  • chrisfrob's Avatar
  • Offline
  • New Member
  • Posts: 7
  • Karma: 0
OK, I think I've got that far.

Now need to know what changes to make to the config.h.in and HWProfile.h files to enable both boards and have them talk to each other.
The administrator has disabled public write access.

Enable Modbus Relay Board 3 years 11 months ago #483

  • jvetter
  • jvetter's Avatar
  • Offline
  • Senior Member
  • Posts: 62
  • Thank you received: 3
  • Karma: 1
1. UPDATE the number of MODBUS relay boards you have @ github.com/brewtrollergit/brewtroller/bl...src/Config.in.h#L503
Note: 2.7 currently only supports up to two MODBUS Relay boards
2. UNCOMMENT RGBIO_ENABLE macro @ github.com/brewtrollergit/brewtroller/bl...src/Config.in.h#L665
3. UPDATE the number of RGBIO boards you have @ github.com/brewtrollergit/brewtroller/bl...src/Config.in.h#L681
4. Add your RGB configuration @ github.com/brewtrollergit/brewtroller/bl.../Com_RGBIO8.cpp#L106
5. To customize PID Display, update configuration @ github.com/brewtrollergit/brewtroller/bl...rc/Com_BTPD.cpp#L105
6. run "make clean; make" to get a new clean image
7. Flash BT with new image using avrdude
8. Power on BT and update setup using LCD/ENCODER interface
- Add Relay Boards from Main Menu->System Setup->RS485 Outputs
- Add RGBIO boards from Main Menu->System Setup->RGB Setup

Let me know if you run into any problems
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.089 seconds
Follow via Facebook Follow via Twitter

Login